The marking of parking lots is very necessary since it helps in directing drivers to the designated spaces where they are supposed to pack their vehicles. Stripping of parking lots is normally done in parking spaces for schools, businesses, hospitals, and other organizations. Also, public parking spaces are normally marked appropriately as per the laws within the jurisdiction. Certain factors need to be observed in order to mark lots correctly. When in search of specialists in parking lot marking Arkansas should be given priority.
The first factor that one needs to understand is the kind of laws that apply within their jurisdiction. The laws affect various aspects concerning stripping, such as the dimensions of the parking stalls, color of paint to be used, width of the marking lines, and accessibility of the facility among others. Even though the width of stalls varies based on the jurisdiction, the standards stall should be 9 feet wide and 18 feet long.
Lots normally contain aisles which allow drivers to have easy access to stalls. These aisles offer drivers enough space for maneuvering around the lot and backing out from their parking spots. Two-way drive aisle is supposed to have a minimum width of 24 feet. On the contrary, the width of a two way-drive aisle is supposed to be 12 feet. These are the standard measurements of stalls that are placed at a certain angle. The aisle width should increase with increase in the angle of the stalls towards 90 degrees.
In the US, the white color is considered as standard for marking lots according to federal standards. Spots not available for parking are demarcated by the yellow color. This includes painted islands situated at the parking row ends. Blue color is for handicapped-accessible spots. People are usually prohibited from parking in fire lanes, which are used for firefighting operations. These lanes are demarcated in red.
Normally, stripping is undertaken for two main purposes, namely, aesthetics and safety. When the paint gets applied meticulously and colorfully on the pavement, aesthetics are achieved. Also, safety can be achieved since these markings direct drivers, which reduces instances of accidents. The markings additionally ensure that space is used economically.
When one is applying paint on concrete substrates, the best choice of paint to use is chlorinated rubber paint for the best adherence. On the other hand, fresh sealer or asphalt requires water-borne coating. Re-stripping can be done using various kinds of paint, but set-quick acrylic waterborne paints are the best choice. Acrylic paints should be applied at 45 degrees F.
So as to obtain better results, airless stripping machine has to be used. Thickness of these markings should be 13 mm. There is a possibility of the surface being soaked with paint, leading to thinner application at the end. It takes approximately thirty minutes for the paint to completely dry and make the lot to be ready for use.
One is better off applying two thin coats of the paint as opposed to one thick coat. When the marks lose their visibility to 75 percent, it is time to re-strip. The right material should be used to return the marks to their initial level of visibility.
The first factor that one needs to understand is the kind of laws that apply within their jurisdiction. The laws affect various aspects concerning stripping, such as the dimensions of the parking stalls, color of paint to be used, width of the marking lines, and accessibility of the facility among others. Even though the width of stalls varies based on the jurisdiction, the standards stall should be 9 feet wide and 18 feet long.
Lots normally contain aisles which allow drivers to have easy access to stalls. These aisles offer drivers enough space for maneuvering around the lot and backing out from their parking spots. Two-way drive aisle is supposed to have a minimum width of 24 feet. On the contrary, the width of a two way-drive aisle is supposed to be 12 feet. These are the standard measurements of stalls that are placed at a certain angle. The aisle width should increase with increase in the angle of the stalls towards 90 degrees.
In the US, the white color is considered as standard for marking lots according to federal standards. Spots not available for parking are demarcated by the yellow color. This includes painted islands situated at the parking row ends. Blue color is for handicapped-accessible spots. People are usually prohibited from parking in fire lanes, which are used for firefighting operations. These lanes are demarcated in red.
Normally, stripping is undertaken for two main purposes, namely, aesthetics and safety. When the paint gets applied meticulously and colorfully on the pavement, aesthetics are achieved. Also, safety can be achieved since these markings direct drivers, which reduces instances of accidents. The markings additionally ensure that space is used economically.
When one is applying paint on concrete substrates, the best choice of paint to use is chlorinated rubber paint for the best adherence. On the other hand, fresh sealer or asphalt requires water-borne coating. Re-stripping can be done using various kinds of paint, but set-quick acrylic waterborne paints are the best choice. Acrylic paints should be applied at 45 degrees F.
So as to obtain better results, airless stripping machine has to be used. Thickness of these markings should be 13 mm. There is a possibility of the surface being soaked with paint, leading to thinner application at the end. It takes approximately thirty minutes for the paint to completely dry and make the lot to be ready for use.
One is better off applying two thin coats of the paint as opposed to one thick coat. When the marks lose their visibility to 75 percent, it is time to re-strip. The right material should be used to return the marks to their initial level of visibility.
About the Author:
You can find a summary of the advantages you get when you use professional parking lot marking Arkansas services at http://www.arrowstriping-nwa.com today.
The marking of parking lots is very necessary since it helps in directing drivers to the designated spaces where they are supposed to pack their vehicles. Stripping of parking lots is normally done in parking spaces for schools, businesses, hospitals, and other organizations. Also, public parking spaces are normally marked appropriately as per the laws within the jurisdiction. Certain factors need to be observed in order to mark lots correctly. When in search of specialists in parking lot marking Arkansas should be given priority.
The first factor that one needs to understand is the kind of laws that apply within their jurisdiction. The laws affect various aspects concerning stripping, such as the dimensions of the parking stalls, color of paint to be used, width of the marking lines, and accessibility of the facility among others. Even though the width of stalls varies based on the jurisdiction, the standards stall should be 9 feet wide and 18 feet long.
Lots normally contain aisles which allow drivers to have easy access to stalls. These aisles offer drivers enough space for maneuvering around the lot and backing out from their parking spots. Two-way drive aisle is supposed to have a minimum width of 24 feet. On the contrary, the width of a two way-drive aisle is supposed to be 12 feet. These are the standard measurements of stalls that are placed at a certain angle. The aisle width should increase with increase in the angle of the stalls towards 90 degrees.
In the US, the white color is considered as standard for marking lots according to federal standards. Spots not available for parking are demarcated by the yellow color. This includes painted islands situated at the parking row ends. Blue color is for handicapped-accessible spots. People are usually prohibited from parking in fire lanes, which are used for firefighting operations. These lanes are demarcated in red.
Normally, stripping is undertaken for two main purposes, namely, aesthetics and safety. When the paint gets applied meticulously and colorfully on the pavement, aesthetics are achieved. Also, safety can be achieved since these markings direct drivers, which reduces instances of accidents. The markings additionally ensure that space is used economically.
When one is applying paint on concrete substrates, the best choice of paint to use is chlorinated rubber paint for the best adherence. On the other hand, fresh sealer or asphalt requires water-borne coating. Re-stripping can be done using various kinds of paint, but set-quick acrylic waterborne paints are the best choice. Acrylic paints should be applied at 45 degrees F.
So as to obtain better results, airless stripping machine has to be used. Thickness of these markings should be 13 mm. There is a possibility of the surface being soaked with paint, leading to thinner application at the end. It takes approximately thirty minutes for the paint to completely dry and make the lot to be ready for use.
One is better off applying two thin coats of the paint as opposed to one thick coat. When the marks lose their visibility to 75 percent, it is time to re-strip. The right material should be used to return the marks to their initial level of visibility.
The first factor that one needs to understand is the kind of laws that apply within their jurisdiction. The laws affect various aspects concerning stripping, such as the dimensions of the parking stalls, color of paint to be used, width of the marking lines, and accessibility of the facility among others. Even though the width of stalls varies based on the jurisdiction, the standards stall should be 9 feet wide and 18 feet long.
Lots normally contain aisles which allow drivers to have easy access to stalls. These aisles offer drivers enough space for maneuvering around the lot and backing out from their parking spots. Two-way drive aisle is supposed to have a minimum width of 24 feet. On the contrary, the width of a two way-drive aisle is supposed to be 12 feet. These are the standard measurements of stalls that are placed at a certain angle. The aisle width should increase with increase in the angle of the stalls towards 90 degrees.
In the US, the white color is considered as standard for marking lots according to federal standards. Spots not available for parking are demarcated by the yellow color. This includes painted islands situated at the parking row ends. Blue color is for handicapped-accessible spots. People are usually prohibited from parking in fire lanes, which are used for firefighting operations. These lanes are demarcated in red.
Normally, stripping is undertaken for two main purposes, namely, aesthetics and safety. When the paint gets applied meticulously and colorfully on the pavement, aesthetics are achieved. Also, safety can be achieved since these markings direct drivers, which reduces instances of accidents. The markings additionally ensure that space is used economically.
When one is applying paint on concrete substrates, the best choice of paint to use is chlorinated rubber paint for the best adherence. On the other hand, fresh sealer or asphalt requires water-borne coating. Re-stripping can be done using various kinds of paint, but set-quick acrylic waterborne paints are the best choice. Acrylic paints should be applied at 45 degrees F.
So as to obtain better results, airless stripping machine has to be used. Thickness of these markings should be 13 mm. There is a possibility of the surface being soaked with paint, leading to thinner application at the end. It takes approximately thirty minutes for the paint to completely dry and make the lot to be ready for use.
One is better off applying two thin coats of the paint as opposed to one thick coat. When the marks lose their visibility to 75 percent, it is time to re-strip. The right material should be used to return the marks to their initial level of visibility.
About the Author:
You can find a summary of the advantages you get when you use professional parking lot marking Arkansas services at http://www.arrowstriping-nwa.com today.
No comments:
Post a Comment